Compressed air dryers ensure high-quality air

Compressed air dryers ensure high-quality air

Drypoint AC compressed air adsorption dryers from Beko Technologies come in 10 sizes for volumetric flow rates from 100 to 1000 m³/h and operating pressures from 4 to 16 bar (gauge). The cold-regenerated adsorption dryers extract moisture from the compressed air to a pressure dew point.

The cold-regenerated dryers ensure a continuous supply of high-quality air. They are equipped with an efficient compressor synchronisation controller as standard, saving energy. If the compressor is not running, the dryer is also shut down, preventing unnecessary air purging.

The containers are filled with activated alumina desiccant. The innovative shuttle valve with an internal purge air line allows for an adequate air flow even in the event of a power failure, making the system fail-safe, says the company. Galvanised press fittings, easy transport by means of a lift truck and access to all system components show that the unit has been designed with practicability in mind, says Beko. The regeneration air flow is determined by the operating pressure and cannot be adjusted. The regeneration air is released through top quality silencers to the ambient air.

The dryer is shipped with a fully mounted Clearpoint prefilter to remove solid and liquid contaminants. The afterfilter ensures that the downstream compressed air system cannot become contaminated with desiccant abrasion residue. The condensate is drained off through a Bekomat.



You might also like

Compressed air distribution system measures two inch diameter

Kaeser’s versatile aluminum SmartPipe is available in a two inch diameter. SmartPipe is a modular, aluminum compressed air distribution system featuring lightweight materials and simple connectors that can be installed

SFP-Series split flow hydraulic pumps

For multi-point lifting applications and when lifting loads on multiple points, the SFP-Series electrically driven split flow hydraulic pumps from Enerpac are an alternative to using separately operated pumps. Split

Gas compressors target power generation market

Sundyne’s centrifugal gas compressors are for applications associated with the power generation market. As ever-increasing demand for clean energy leads to widespread use of gas turbine power generation in industrial